Wind turbine bracket ref.5442
The wind turbine bracket consists of a plate with a Øint=50mm tube welded in the center. The plate is fixed to the arch by means of 4 bridges, which can be Ø35mm (if the support goes at one end of the arch) or Ø30mm (if it goes in the central part). Then we have the part that is attached to the wind turbine. It is a reversible piece. At one end is a 1.5 inch schedule-10 tube (Øext=48.3mm, Øint= 42.7mm). At the other end there is a tube of Øext=25mm, Øint=22mm welded. In this way, the part can be adapted to different models of wind turbines.
We can also adapt the piece to the wind turbine that you have if you tell us the size you need.
The wind turbine bracket consists of a plate with a Øint=50mm tube welded in the center. The plate is fixed to the arch by means of 4 bridges, which can be Ø35mm (if the support goes at one end of the arch) or Ø30mm (if it goes in the central part). Then we have the part that is attached to the wind turbine. It is a reversible piece. At one end is a 1.5 inch schedule-10 tube (Øext=48.3mm, Øint= 42.7mm). At the other end there is a tube of Øext=25mm, Øint=22mm welded. In this way, the part can be adapted to different models of wind turbines.
We can also adapt the piece to the wind turbine that you have if you tell us the size you need.
The wind turbine bracket consists of a plate with a Øint=50mm tube welded in the center. The plate is fixed to the arch by means of 4 bridges, which can be Ø35mm (if the support goes at one end of the arch) or Ø30mm (if it goes in the central part). Then we have the part that is attached to the wind turbine. It is a reversible piece. At one end is a 1.5 inch schedule-10 tube (Øext=48.3mm, Øint= 42.7mm). At the other end there is a tube of Øext=25mm, Øint=22mm welded. In this way, the part can be adapted to different models of wind turbines.
We can also adapt the piece to the wind turbine that you have if you tell us the size you need.
Characteristics
Manufactured in polished stainless steel AISI-316.AISI316.
Useful for Ø25-Ø48 wind turbine bases (we can adapt it to another size if you tell us).
Includes 4 Ø30 bridges + 4 Ø35 bridges in case it is necessary to mount it at one end of the arch (Ø35 tube)
Screws and nuts included
Assembly instructions